Inspection frequencies: Leisure/recreational
© Getty Images/Niklas Skur/EyeEm

Leisure/
Recreational

A guide to inspection frequencies

    alt txt

    properties.trackTitle

    properties.trackSubtitle

    Employers have a duty of care to ensure the health, safety and welfare of their employees. Periodic inspections and/or thorough examinations on their plant and equipment form part of this vital duty, whilst also ensuring employer conformity to applicable health and safety legislation.

    Plant and equipment within the workplace needs to be examined and properly maintained to ensure it is safe to operate, and that it complies with applicable health and safety legislation; requiring statutory examinations at specific intervals, which exist outside normal equipment maintenance and servicing procedures.

    Regular inspections may also serve as a good preventative maintenance programme to ensure the integrity of plant and equipment; helping to minimise machinery breakdowns.

    Inspection frequencies

    Different types and categories of equipment have varying inspection frequencies according to applicable health and safety legislation.

    Typical equipment and installations found within leisure and recreational establishments are listed below, together with the applicable legislation.

    Applicable legislation (1) Typical equipment Inspection/thorough examination frequency (months)
    Lifting Operations and Lifting Equipment Regulations 1998 Manual chain block 12
    Crane: swing jib 12
    Passenger lift (2) 6
    Stair lift (2) 6
    Goods/service lift 12
    Escalator (3) 6
    Personnel hoist: swimming pools 6
    Pallet truck 12
    Window cleaning equipment/building maintenance unit 6
    Fall protection equipment (harness with lanyard) 6
    Lifting accessories (removable eyebolt) 6
    General lifting support equipment (e.g. runway track) 12
    (1) For Northern Ireland, similar statutory equipment legislation is applicable. (2) The Lifting Operations and Lifting Equipment Regulations and/or Provision and Use of Work Equipment Regulations are applicable if the item is used by employees at a place of work. (3) The Provision and Use of Work Equipment Regulations are applicable if the item is used by employees at a place of work.
    Applicable legislation (1) Typical equipment Inspection/thorough examination frequency (months) (2)
    Pressure System Safety Regulations 2000 Coffee machine boiler 14
    Expansion vessel 13/26
    Air receiver 13/26
    Provision and Use of Work Equipment Regulations 1998 Hot water boiler (<110ºC) 12
    Filter vessel (swimming pools) 12
    Pressure vessel 12
    Refrigeration and air conditioning systems (<25 kW) 12
    (1) For Northern Ireland, similar statutory equipment legislation is applicable. (2) Examination intervals for statutory pressure systems are dictated by a Written Scheme of Examination; a legal document that details the items within the pressure system, including protective devices, and outlines the inspection frequency and requirements.
    Applicable legislation (1) Typical equipment Inspection/thorough examination frequency (months)
    Provision and Use of Work Equipment Regulations 1998 Alternator 12
    (1) For Northern Ireland, similar statutory equipment legislation is applicable.
    Applicable legislation (1) Typical equipment Inspection/thorough examination frequency (months) (2)
    Electricity at Work Regulations 1989 Low voltage electrical installations: swimming pools 12
    Low voltage electrical installations: general areas 36
    Portable appliances 12
    (1) For Northern Ireland, similar statutory equipment legislation is applicable. (2) The frequency of period inspection for electrical systems, installations and equipment covered by the Electricity at Work Regulations is dependent on the type and use of the installation, the quality and frequency of maintenance and any external influences which the installation may be subject to.
    Applicable legislation Typical equipment Inspection/thorough examination frequency (months)
    S.I. No. 299 of 2007: Safety, Health and Welfare at Work (General Application) Regulations 2007 Manual chain block 12
    Crane: swing jib 12
    Passenger lift 6
    Stair lift 6
    Goods/service lift 12
    Escalator 6
    Personnel hoist: swimming pools 6
    Pallet truck 12
    Window cleaning equipment/building maintenance unit 6
    Fall protection equipment (harness with lanyard) 6
    Lifting accessories (removable eyebolt) 6
    General lifting support equipment (e.g. runway track) 12
    Applicable legislation Typical equipment Inspection/thorough examination frequency (months)
    S.I. No. 445 of 2012: Safety, Health and Welfare at Work (General Application) (Amendment) Regulations 2012 Coffee machine boiler 14
    Expansion vessel 13/26
    Air receiver 13/26
    S.I. No. 299 of 2007 (Regulation 30): Safety, Health and Welfare at Work (General Application) Regulations 2007 Hot water boiler (<110ºC) 12
    Filter vessel (swimming pools) 12
    Pressure vessel 12
    Refrigeration and air conditioning systems (<25 kW) 12
    Applicable legislation Typical equipment Inspection/thorough examination frequency (months)
    S.I. No. 299 of 2007 (Regulation 30): Safety, Health and Welfare at Work (General Application) Regulations 2007 Alternator 12
    Applicable legislation Typical equipment Inspection/thorough examination frequency (months)
    S.I. No. 299 of 2007 (Part 3): Safety, Health and Welfare at Work (General Application) Regulations 2007 Low voltage electrical installations: swimming pools 12 (1)
    Low voltage electrical installations: general areas 12-60 (1)
    Portable appliances 3-60 (2)
    (1) Unless specified otherwise by a risk assessment/the manufacturer. (2) A general guide dependent on location, and unless specified otherwise by a risk assessment/the manufacturer.

    Plant Guide: Diagrams

    View detailed diagrams of typical plant and equipment used across various industries, together with applicable legislation for each item.

    How HSB can help

    HSB Inspection Services: Our network of competent, multi-skilled Engineer Surveyors help customers throughout the UK and Ireland to maintain workplace equipment safety, optimise the efficiency of plant and equipment, and comply with applicable health and safety legislation; covering boiler/pressure, lifting, electrical/mechanical, dust and fume extraction, power press equipment, and fixed wiring installations.

    HSB Risk Management Solutions:  We can help businesses to reduce risks, costs, and deliver compliance via improved analysis of their equipment and health and safety practices. Consisting of three services, each service is further split into modules, allowing customers to build them to fit their business.

    Regulations