HSB | Engineering inspection frequencies - Leisure/recreational
© Getty Images/Niklas Skur/EyeEm

A guide to engineering inspection frequencies


Employers have a duty of care to ensure the health, safety and welfare of their employees. Periodic engineering inspections on their plant and equipment form part of this vital duty, whilst also ensuring employer conformity to applicable health and safety legislation.

Plant and equipment within the workplace needs to be examined and properly maintained to ensure it is safe to operate, and that it complies with applicable health and safety legislation; requiring statutory 'thorough examinations' at specific intervals (thorough examinations exist outside normal equipment maintenance and servicing procedures).

Regular inspections may also serve as a good preventative maintenance programme to ensure the integrity of plant and equipment; helping to minimise machinery breakdowns.

Inspection frequencies

Different types and categories of equipment have varying inspection frequencies according to applicable health and safety legislation.

Typical equipment and installations found within leisure and recreational establishments are listed below, together with the applicable legislation.

Equipment category Applicable legislation (1) Typical equipment Inspection/thorough examination frequency (months)
Lifting Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) Manual chain block 12
Crane: swing jib 12
Passenger lift (2) 6
Stair lift (2) 6
Goods/service lift 12
Escalator (3) 6
Personnel hoist: swimming pools 6
Pallet truck 12
Window cleaning equipmentt/building maintenance unit 6
Fall protection equipment (harness with lanyard) 6
Lifting accessories (removable eyebolt) 6
General lifting support equipment (e.g. runway track) 12
Pressure (4) Pressure System Safety Regulations 2000 (PSSR) Coffee machine boiler 14
Pressure vessel 12
Air receiver 12
Provision and Use of Work Equipment Regulations 1998 (PUWER) Hot water boiler (<110ºC) 12
Pressure vessel 12
Refrigeration and air conditioning systems (<25 kW) 12
Electrical/mechanical plant Provision and Use of Work Equipment Regulations 1998 (PUWER) Alternator 12
Electrical systems (5) Electricity at Work Regulations 1989 (EAWR) Low voltage electrical installations: swimming pools 12
Low voltage electrical installations: general areas 36
Portable appliances 12
1. For Northern Ireland and the Republic of Ireland, similar statutory equipment legislation is applicable. HSB's inspection services in the Republic of Ireland are provided to comply with the equivalent legislation. 2. LOLER and/or PUWER are applicable if the item is used by employees at a place of work. 3. PUWER is applicable if the item is used by employees at a place of work.
4. Examination intervals for statutory pressure systems are dictated by a Written Scheme of Examination; a legal document that details the items within the pressure system, including protective devices, and outlines the inspection frequency and requirements. 5. The frequency of period inspection for electrical systems, installations and equipment covered by EAWR is dependent on the type and use of the installation, the quality and frequency of maintenance and any external influences which the installation may be subject to.

Plant Guide

View detailed diagrams of typical plant and equipment used across various industries, together with applicable UK legislation for each item.

HSB Inspection Services

Engineering inspections focused on helping our customers to maintain workplace equipment safety, optimise the efficiency of plant and equipment, and comply with applicable health and safety legislation.