HSB BI&I - Why Do I Need a Jurisdictional Boiler Certificate, Inspection and Insurance?

Normal view (turn off text only mode)
You are here:

Jurisdictional Inspections

New Ontario Boiler and Pressure Vessel Regulations

New Ontario Boiler and Pressure Vessel Regulations, effective July 1, 2018, include a change to the process by which Certificates of Inspection are obtained by owners.

Download fact sheet (PDF, 670 KB)

Download cheat sheet (PDF, 138 KB)

Ontario Jurisdictional Inspection Requirement Form

Do you have a new boiler or pressure vessel in Ontario that needs a jurisdictional inspection? Or are you unsure whether your equipment falls under jurisdictional requirements?

Download fillable Jurisdictional Inspection Requirement Form (PDF, 4.2 MB)

All provinces require Jurisdictional Inspections for regulated pressure equipment such as boilers and pressure vessels. The equipment must be inspected and certified that it is safe to operate by an authorized inspector. It is the responsibility of the owner of this equipment to have it inspected and certified at prescribed intervals. Depending on the province these inspections may be done either by the jurisdiction or by a qualified insurance boiler inspector.

As part of our Equipment Breakdown insurance programs we:

  • Identify insureds that have jurisdictional inspection services requirements
  • Schedule and perform boiler and pressure vessel inspections in accordance with jurisdictional requirements
  • Provide recommendations where hazardous conditions are noted
  • Offer advice to improve equipment operation, maintenance and reliability

As the largest insurer of machinery and equipment in Canada, we can handle the inspection requirements of any class of business, whether it is a laundry or a large manufacturing plant. Meeting local jurisdictional inspection requirements is important as provincial authorities can fine businesses that don't comply and can even shut down operations.

Preparing for Inspections

Our goal is to complete a thorough jurisdictional inspection without disrupting your operations. We know that you are busy. It's important that our inspectors use the time as efficiently as possible to make sure your equipment complies with codes and regulations. These steps will help you prepare for an inspection:

External Boiler Inspections
  • Schedule the appointment when the boiler operator or maintenance personnel are available to perform any required testing of controls and safety devices
  • Don't forget to inform the operator of the date and time
  • Make sure the current certificate of inspection is posted
  • Keep clutter and debris out of the boiler room. This is always important for safety reasons, and the boiler inspector needs to have access to equipment
Internal Boiler Inspections

Some boilers require periodic internal inspections. In addition to the tips listed above, the following actions should be taken by the customer to prepare for an inspection:

Secure your boiler by physically isolating it from process:

  • Lock valves in closed position
  • Lock electrical breaker in off position
  • Lock gas supply in off position
  • Arrange to have your boiler cool. Remove manhole and handhole plates
  • Clean all boiler surfaces thoroughly, internally and externally

If the boiler has a low water fuel supply cut out, have the device dismantled for a complete examination of all parts.


Are you a broker? Self-rate, bind and issue commercial equipment breakdown policies in less than 5 minutes.

Main Navigation
Service Men

© The Boiler Inspection and Insurance Company of Canada | La Compagnie d’Inspection et d’Assurance Chaudière et Machinerie du Canada.
All rights reserved | Tous droits réservés


This publication is available exclusively to Munich Re clients. Please contact your Client Manager.