Thermography Examples

Normal view (turn off text only mode)
You are here:

HSB Thermography Services

Thermography examples

These real-world examples demonstrate the effective use of infrared thermography.

Overheated transformer bushing 

This transformer experienced an internal problem that manifested itself as an overheated bushing. Within 24 hours, it was removed from service and the back-up unit was installed. This averted potential spoilage of millions of dollars in agricultural products.

Under-lubricated motor bearing 

The bearing on the driving end of this motor was reading 187 degrees F, more than 60 degrees above ambient. Upon examination, it was discovered that the lubrication was insufficient. Correcting the problem prevented failure of the motor.

A properly operating steam trap 

Not all hot spots indicate a problem. This image shows a steam trap that is operating properly. Faulty steam traps waste energy; infrared thermography is an invaluable tool for readily detecting them so they can be repaired.

hsb logo

Contact Us

Ronald (JR) Smith, Director
HSB Thermography Services
Call 216-588-1381

Click Here to Email Us 


Main Navigation
Service Men
Accessibility

© Copyright 2017 The Hartford Steam Boiler Inspection and Insurance Company. All Rights Reserved.

Note


This publication is available exclusively to Munich Re clients. Please contact your Client Manager.